CIRRUS – WTG Work Positioning Belt

CIRRUS WTG Work Postioning Belt
The CIRRUS WTG Work Positioning Belt is designed for wind turbine climbers and can be used for work restraint.  It is a quick connect positioning belt, which can be used with the CIRRUS Harness.  The CIRRUS WTG Work Positioning Belt complies with the Siemens PPE requirements PRO-13838 Ap. Gallery PDF DownloadsSizes Available: FeaturesSpecifications Gallery PDF DownloadsCIRRUS WTG Work Positioning Belt… Read More

ALTUS Alloy tri-act Karabiner

ALTUS Alloy tri-act karabiner
The ALTUS Alloy tri-act karabiner is commonly used when weight is an issue, such as tower climbing or in rope access. It has an offset D-shaped with triple action lock.  The ALTUS Alloy tri-act karabiner has an 11mm bar diameter with 19mm gate opening. Gallery PDF Downloads FeaturesSpecificationsGallery PDF Downloads ALTUS Alloy tri-act karabiner DatasheetFeatures Alloy D shape 28kN Tri-act… Read More

ELITE Twin Lanyard 1.25m

ELITE twin lanyard 1.25
This is an energy absorbing suspension relief fall arrest twin lanyard with scaffold hooks.  The Heightec ELTIE twin lanyard allows for connection to a ladder or structure when climbing masts and towers and includes scaffold hook terminations.  It is a premium product offering advanced safety features. Its special compact energy absorbing element has a high strength stainless steel connecting ring. … Read More

ELITE Twin Lanyard 1.75m

ELITE Twin Lanyard 1.75
This Lanyard was developed for use on overhead line towers for vertical climbing and structural attachment.  It allows for continuous protection while moving location by providing a connection to alternating anchor points. It is fitted with 2 large pear shaped karabiners that have side opening gates for greater gate clearance and is also fitted with two double action hooks that… Read More

Delta Steel Screwlink 10mm

Delta Steel Screwlink 10mm
The Delta Steel Screwlink is a high strength and versatile connector and is much more secure than a karabinder.  It negates the possibility  of cross loading  and is suitable for a wide range of uses in work at height and rescue situations.  The screw barrel must be fully closed during use. Gallery PDF Downloads SpecificationsGallery PDF Downloads Delta Steel Screwlink… Read More

Heightec Lanyard Parking Point

Heightec parking point
The Heightec Lanyard Parking Point can be positioned on the harness shoulders so end connectors are stowed high up to reduce trip hazards associated with longer lanyards. Clipping the leg of a twin lanyard onto a load bearing point on the harness can lead to the incorrect and potentially dangerous loading if the user falls and the energy absorber deploys. … Read More

PIRANHA wp adjustable lanyard 2m

PIRANHA wp adjustable lanyard 2m
The PIRANHA Adjustable Lanyard is a compact device used for work positioning on masts, towers, pylons or other lattice structures in telecoms, power and entertainment industries.  It has a gradual action and can be accurately controlled with one hand.  This adjustable lanyard allows for precise positioning for the work task.  Its sleeve protects against abrasion, sharp edges and contamination. The… Read More

Sewn Nylon Sling

Sewn Nylon Sling Datasheet
Sewn Nylon Sling The Sewn Nylon Sling has a round loop of 25mm width webbing.  It can be used end to end or wrapped around as a strop.  The Sewn Nylon Sling allows connection to an anchor point that may be too large to connect directly to.  This can also be used to extend an anchor point to a more… Read More

PIRANHA Adjustable Lanyard 5m and 10m

PIRANHA Adjustable Lanyard 5m and 10m
The PIRANHA Adjustable Lanyard is suitable for roofs and sloping situations and locks automatically when loaded. The PIRANHA Adjustable Lanyard is a versatile and adjustable rope fall prevention system for flat or sloping situations.  It provides support to a user positioned below the anchorage point or provides restraint against a fall to a user connected to a properly positioned anchor away from… Read More

Cirrus WTG Harness

Cirrus WTG Harness
The CIRRUS WTG Harness has quick connect leg loops and a chest strap buckle which is fully adjustably allowing for an easy and comfortable fit.  It also comes with shoulder buckles which allows quick and easy adjustment with one hand. The adjustable structure of the CIRRUS WTG Harness ensures a good fit with maximum comfort and security.  The unique stainless… Read More